RM41.39
TURQUOISE GREEN SK-40TQ SK RUBBER DYE 1KG
Price RM41.39
Product SKU SK-40TQ
Brand SK Color
Size (L x W x H) 15 cm x 15 cm x 30 cm
Points Needed 3800
Availability Out Of Stock
Shipping Fee
Brunei Darussalam Starting from RM39.60
United Kingdom Not Applicable
United States Not Applicable
Ireland Not Applicable
Description
Highlight

Description

 

General Information:

Ready-to-print water based screen printing ink for natural fabric, fabric consisting of mostly natural material such as TK, TC, polyester and etc., and un-coated paper.

It gives film-like texture once printed on fabric or paper

 

Mesh Guidelines:

Can be used with any mesh between 36-120
100 mesh is recommended

 

Stencil/Emulsion Guidelines:

We recommend using S.K. Violet or Blue Emulsion followed by coating your emulsion after with S.K. Emulsion Hardener.

 

Mixing info:

Can be mixed with other S.K. Rubber Inks

 

Printing Instructions:

  1. Pure generous amount of S.K. Rubber Ink on one side of your screen, and make sure that the ink is loaded in straight line covering width of unexposed area.
  2. Push and pull squeegee stroke are both suitable for S.K. Rubber Ink.

2.1 Start stroking your squeegee to another side of your screen with some pushing-down force applied.

2.2 (1)In case of continuous printing, make sure that ink is scraped off excess ink from unexposed area of screen to prevent screen from premature clogging, and wet printed surface.

(2)In case of discontinuous printing, make sure that your screen is flooded with ink to prevent clogging and during wait time.

*S.K. Rubber Ink can be printed with other S.K. Plastisol Ink, and S.K. Transparent Ink

 

 

Flashing/Drying Instructions:

For flashing, set your preferred temperature according to your printed material’s heat durability.

For drying, normal hair drier would yield preferable results.

*Industrial drier or hot gun are not recommended.

*Curing is needed after printed ink is dry to touch.

 

Heat pressing:

Heat pressing at 180°C(356°F) for 10 seconds is recommended after flashing or drying to achieve smooth surface and ultimate curing.

 

Printing on an under base:

Can be printed on all of other S.K.’s ink products.

Printing as under base on dark material before printing other rubber inks is recommended.

 

Curing Instructions:

Printed fabric should be cured for a minimum of 60 seconds at 180°C(356°F).

Ideally, printed fabric should be cured for on a and half minutes at 150-170°C(302°F-338°F).

 

Testing/Precautions:

Stretching and washing test printed material after printing are recommend to ensure the most preferable result.

 

Clean Up:

Use water to wash the ink off immediately after finish using.

Or, use S.K. Stencil Remover to remove some clog or dry ink in case there are some clogs and dries by soaking cotton cloth into S.K. Stencil Remover and using the cotton cloth to gently wipe the clogged area on screen. *Apply more wiping force in case of harder clogging.

 

Storage info:

Tightly close container(s). Keep in cool or room temperature, 25°C(77°F).

 

CAUTION

Do not breathe vapors. Wear protective gloves. Do not eat, drink or smoke when using product. Wash hands thoroughly after handling. Dispose of this product in accordance with local, regional, national and international regulations as specified.

TURQUOISE GREEN SK-40TQ SK RUBBER DYE 1KG

Product details of Rubber Dye (Solid) Color (20 Types Color)

  • This is water-based rubber screen-printing dye suitable for screen-printing cotton, polyester, TC, TK Fabric.
  • Black, Brown, Grey, Leaf Green, Turquoise Green, Light Green, Light Blue, Navy Blue, Royal Blue, Violet, Brite Red, Warm Red, Magenta, Orange, Cream, Super White, Pinkish Cream, Pink, Golden Yellow, Yellow

*Refer other listing for the other color

Product Details

  • This is water-based rubber screen-printing dye suitable for screen-printing cotton, polyester, TC, TK Fabric.

*Please note that colour may vary due to the lighting effect on screen.

(A). Instruction

1. Mesh 100-120 mesh/inch are the most suitable for screen printing rubber dye.

2. Use Vshape squegee to screen print the dye. Screen printing 2-3 rounds to yield maximum opacity. For each around, dye already printed on fabric should be dried before going for another round of screen printing. In case of using flash dryer, suitable temperature should be 150-180 degree c for 5-10 seconds depending on distance between printed dye and the heat source.

3. After removing printed fabric from screen printing table, final curing is recommended. Final curing can be achieved in two ways. First, use convenyer oven to cure at 150-180 degree c for 5-7 seconds. Second, use heat press machine along with teflon covering printed area to cure at 180 degree c for 7-10 seconds at medium pressure.

(B). Available Color:

  • Black, Brown, Grey, Leaf Green, Turquoise Green, Light Green, Light Blue, Navy Blue, Royal Blue, Violet, Brite Red, Warm Red, Magenta, Orange, Cream, Super White, Pinkish Cream, Pink, Golden Yellow, Yellow
What's in the box

TURQUOISE GREEN SK-40TQ SK RUBBER DYE 1KG

Tags: SKCOLOR